Latest weighing machine repair Tenders | Government weighing machine repair Tenders

Central Government/Public Sector

CTN :45248668

10 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap channel sleeper of girder bridge intact & crack with or without hook bolt qty. 61 nos. average weight each nos. 130 kgs., total weight 7.930 mts. sse lot no. sse pw bpf scrap channel sleeper 2025-26/30 dt 02.02.2026 note: 1.delivery will be given by weightment .2. cutting may allowed for easy loading. 3, during the delivery against lot is approx. and there may be variation in weight up to +/-10% due to average weight assessment. 4. buyer should be visit to site before bidding

Private Sector

CTN :45256527

25 May, 2026 NA

Amravati - Maharashtra

Tender For procurement of goods digital weight bridge platform , digital load cell (30 ton), electronic weighing unit (it indicator) junction box remote display ,printer ,ci weight ,stamping

State Government

CTN :45228145

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of ci cs casted items - c.i. casted items on new basis, c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sproc

CTN :45233270

08 Jun, 2026 NA

Doiwala - Uttarakhand

Tender For spares and annual maintenance contract of tyco sugar weighing machine - spare and amc of tyco sugar weighing machine, repair, overhauling and annual maintenance contract for tyco automatic electronic weighing & bagging machine for the crushing season 2026-2027., proximity switch assly. 24 vdc-npn, solenoid valve c/w coil 24 vdc, festo tube, air regulating valve assly., quick valve assly., brush with cage, leather belt for bag clamp, rubber pad for bag clamp, indicating lamp red/green 24 vdc, indicating lamp red/green 240 vac, sealing kit for load clamp cylinder 3 , sealing kit for load bucket cylinder 2.1/2 , sealing kit for coarse/fine cylinder 1.1/2 , aluminum t connectors with brass nozzle, cylinder assly. for bag clamp 3 x 100, cylinder assly. for coarse/fine 1.1/2 x 75, actuator coil for solenoid 24vdc, load cell (capacity 110 kgs.), relay unit, connection c/w nozzel for bag sport, brass nozzel size , display unit c-750 (mettler toledo), f.r.l. unit having 2 nos. bottles, auto/manual switch, n.o. element of push button, cylinder for mechanical load bucket, s.m.p.s., micro switch assly., nylon bearing, rod end bearing with holder pin, stud for load cell c/w nut, u profile element, load bucket (mechanical type) assly. c/w pneumatics contact part ms, bag spout assly. c/w pneumatics, contact part ms, master frame assly (feeder) c/w pneumatics for make sugar silo, cylinder for shutter (course/fine), fork for machanical cyl. with pin for pan door, regulator valve for shutter cyl., cylinder for bag clamp., pan door seal, ac 220 v, lamp, damp switch with no point, n.o. connector, machincal cylinder (l.b.), numetic pipe, l.max connector, machanical load bucket, control pannel of bagging machine, level sensor for sugar bin system, relay card 24 vdc, flow control valve, copper pipe

CTN :45235126

26 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - lot no.nws/guillotine shearing machine/05/26-27/10 description- condemned guillotine shearing m/c no. 23sh/44, make-m/s. wilhelmburger machine fabok hinrches, west germany with motor, 30kw (45 hp), starter and main switch = 1 no. materials to be sold "as is where is basis". note: (a) before bidding the bidders are requested to inspect the lot and approach road etc. (b) cutting will be allowed in presence of consignee or his authorised representative. (c) purchaser should undertake that the activity of gas cutting and dismantling is not any way to affect the railway daily work or endanger railway property or rly workers lives. (d) delivery will be in weight basis. (e) loading will be done by purchaser own arrangements under supervision of witnessing concern official only after entire dismantled of the machine. (f) if any excess quantity found of this lot the purchaser will return to custodian. (g) if any shortage of materials the value will be return to purchaser. (h) weighment of truck i.e. tare & gross has to be done electronic weigh bridge at amm/r-yard/kgp. (i) safety equipment during cutting to be arranged by the purchaser for his staff and ensure its use. (j) sse (w-mc)/shop-44/kgp electrical maintenance to ensure electrical or any other permission before cutting & delivery related to safety matter.(k) if any oil content found that to be safely decanted by the purchaser and return to consignee. (l) other terms & conditions are as per e-auction condition.

Central Government/Public Sector

CTN :45235186

26 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - pway fitt. ci 98050114 scrap p-way ci fittings: scrap p-way ci fittings released corroded, damaged and perforated including ci blocks, sej fitting ci, sej fitting and block, distance blocks (ms) , control weight, riser, reservoir tank bridge plates, sej plate ci,ci pully, fittings for improved sej 60 kg, cst-9 plates attached with rail pieces, glue joint attached with rail, control arm upper lower ,ramp plates, metal rail sleepers,foundation attch with rail, p-way ci items, water tank ci items, pot signal,bearing holding assymbly, ms jet bracket, mechanical jack, castings and other miscellaneous ci and m.s. scrap, material beyond economical repair ber, sold on as is where is basis, u/s for railway use, loading by purchaser, custodian: dms/scrap/pardi.

Central Government/Public Sector

CTN :45220468

25 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - scrap heavy structure various type of ms and gi items such as girder, girder pieces , girder cut up material , angle, channel, rail board, rail structure , bridge items, all type of air blower, rail dolley p. way trolly, lorry, machine, hand lorry, wheel barrow, fob cut up material, gi /ms /ci pipe,tie bar structure, frame, round bar, cage frame, rail poll/post, airtank, pressure chamber, mast, m s sheets, ms plate, ms box, flat, checkered plate , ci/ms foundation, ms tool trunk, fastening aids , velley, air reservoir, cattle guard, shutter, ci items, ms crip, clamp grill ,fencing, windows, door, counter weight, trusses and other fabricated ms /gi stucture etc. with or without other ferrous and minor non ferrous attachment old used and u.s

Central Government/Public Sector

CTN :45174787

20 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap unserviceable released demolished steel girder of bridge no 67 (span-1),69(span-1),83(span-1),87(span-8),94(span-4),106(span-3),112(span-5) qty 316.098 mt at location smla ¿ tba ng section. delivery by actual weight only and on as is where is basis. custodian: sse pway c prtn. fdp 50 days. the lot details are as per jvr and measurement sheet only. cutting allowed for easy loading. delivery will be given after full payment.

Central Government/Public Sector

CTN :45174694

20 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - p.l. no. 98090124 condemned and unserviceable ferrous bearings with brass cage of sorts and sizes. [ 27.650 kgs. approx. average weight/piece] with / without grease. it is permitted to remove grease. undefaced bearings have to be defaced by purchaser. note:- cssd / goc electronic weigh bridge to be used for weighment.

Co-operative

CTN :45067466

13 May, 2026 85.0 Thousand

Mehsana - Gujarat

Tender For service require for testing of 60tn mettler toledo make weigh bridge with 10 ton rental standard weight with calibration test report.

Weighing Machine Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors